Acoustic Power Lab Ltd. has released the APL1s, a two-channel 1RU half-rack hardware loudspeaker equalization solution that enables the application of corrective as well as custom FIR filtering in production and post production studio-monitor, live-performance, and installed sound systems.
- Up to 16 user-configured, 4096-tap FIR equalization curves generated in conjunction with Acoustic Power Lab’s measurement and analysis software may be stored, recalled and applied by the APL1s unit’s high resolution, high dynamic range and ultra-low latency FIR engine.
Acoustic Power Lab’s suite of tools—including APL TDA EQ time domain and APL Workshop power frequency response measurement software—enables users to analyze the total acoustic power of a speaker system, taking into consideration both on-axis and off-axis as well as reflected sound energy. The result is a more meaningful and accurate analysis than single-point, on-axis SPL measurements, according to the company.
Armed with these acoustic power measurements as a guide, a user may apply corrective equalization using the APL1s in order to more accurately reproduce the characteristics of the original sound source through the speaker system. While the software will generate an FIR filter that compensates for anomalies in the speaker design, signal chain, and the local acoustic environment, including imperfect speaker placement, it is not designed to be an automatic, one-button solution. Rather, it is intended for professional operators who can apply their audio engineering experience, talent, and creativity to adjust the equalization curve in order to suit their taste and preferences.
Acoustic Power Lab’s two-channel APL1s supports 24-bit, 48 kHz and 96 kHz output sample rates and accepts 22 kHz to 108 kHz sample rate inputs via the onboard sample rate converter. This features an ultra-low jitter double PLL clock system (jitter is 136 picoseconds at 5 Hz-20 kHz and 75 ps at 20 Hz-20 kHz). The outputs are protected by a power on/off anti-pop feature.
The 4096-coefficient FIR filter file (*.wav and *.fir) generated by Acoustic Power Lab’s software analysis tools is uploaded to the APL1s via a front-panel USB connector. Up to 16 custom FIR files may be stored then recalled using the front-panel rotary selector. Rear-panel connections include AES3 XLR, switch-selectable S/PDIF coaxial and TOSLINK optical, and balanced analog XLR inputs and outputs. Sync may alternatively be switched on the rear panel to the external source.
In practice, the user measures the acoustic power frequency response of each channel of a speaker system by moving a calibrated microphone through a defined pattern over the course of just a few minutes. The Acoustic Power Lab software then generates an inverse FIR filter that is applied by the APL1s to produce a flat response or to meet the operator’s desired target EQ curve.
“Acoustic Power Lab offers powerful tools that provide a very accurate measurement at the start of the process and enable the implementation of a very accurate FIR equalizer at the end of the process," said Raimonds Skuruls, sound engineer, founder, and owner of Acoustic Power Lab Ltd. "Everything between those start and end points is in the hands of the sound engineer, system technician or user.”
