Skip to main content

Oakwood Adventist Academy Features Renkus-Heinz CFX Series

Oakwood Adventist Academy Features Renkus-Heinz CFX Series

Housed on the campus of Oakwood University, Oakwood Adventist Academy (OAA) has been an integral part of the Huntsville, AL, community since its founding in 1896 as the Oakwood Industrial School. In recent years, the coeducational, pre-K-12 academy has upgraded its facilities considerably, including a 28,000-square-foot middle school building, a cafeteria, and a large gymnasium.

  • The gym is a multi-purpose space that hosts musical performances as well as sports and other events. Like most gyms, it's acoustically "live" — so when the Oakwood Adventist Academy called on Quality Sound Systems to design and build a new sound system for the gym, the Madison, AL, systems integrator carefully considered how best to deliver music and highly intelligible speech in this challenging acoustical environment. Renkus-Heinz CFX series vertical arrays and subwoofers proved to be key to the solution.

"It's a beautiful gym," said Mark McCain of Quality Sound Systems, "but there's a lot of slapback, and we needed to do acoustical work on the back walls to keep the reverb down."

For the main loudspeakers, McCain chose Renkus-Heinz CFX101LA point-source vertical array modules. The CFX101LA can deliver up to 9 dB more output with tighter vertical pattern control than a conventional single cabinet, enabling McCain to direct the sound to the audience while minimizing the effects of the gym's reflective surfaces."We flew three CFX101LAs per side, aimed at the bleachers," McCain said. "The arrays cover 95 percent of the room, and you can understand speech very easily, even in the back of the gym."

For sub-lows, McCain chose a pair of Renkus-Heinz CFX15S 15-inch high-performance subwoofers, which have a built-in low-pass crossover and can deliver 128 dB peak SPL between 40 Hz and 100 Hz. They were the right choice but McCain encountered an unexpected challenge when installing them.

"Toward the end of the construction of the gym, the builder put in huge air ducts, which I hadn't known about beforehand," he said. "It made me change the design but it turned out for the best. We ended up aiming the speakers in a somewhat unconventional way, which gave us better coverage with fewer reflections. I mounted the subwoofers to the main beam in the center of the gym, so they couple to the beam, and we get more energy than if we had floated them in the air."

The staff of Systems Contractor News serves the AV integration industry with thorough news analysis, trend reports, and the latest product and technology information—delivered to an audience of decision-makers.