d3 Technologies Show the Ease of Integrating Systems at ISE 2016 - AvNetwork.com

d3 Technologies Show the Ease of Integrating Systems at ISE 2016

Author:
Publish date:

d3 Technologies will be showcasing its full product range including the latest software release, r12, at ISE 2016. Held at the Amsterdam RAI Convention Center, February 9-12, 2016. Integrated Systems Europe (ISE) is the world's fastest growing AV and systems integration event featuring cutting-edge AV technology for professionals in the commercial and residential installation and integration marketplace. d3 Technologies will be exhibiting at stand 8-H238.

d3 Technologies' focus for ISE will be firmly on integration in hardware, in processes and how d3 comfortably sits at the heart of any production or installation. d3's display at ISE will demonstrate all stages of an installation workflow from start to finish, beginning with the design stage in d3's real-time 3D stage simulator, using their software-only product d3 Designer. A wall display will show how you can connect an infinite variety of devices depending on the requirements of your project. The third stage, the delivery, is presented with an interactive 3D model controlled through one of d3's powerful media servers.

Notable products at the stand will be the d3 2x2plus, d3 Technologies' solution for smaller shows and installations, and the new Quad-SDI VFC cards. d3's VFC cards enable users to drive up to 16HD outputs as DVI or SDI (1080p) or 4?4K DP1.2 from a single d3 4?4pro system. This means large multi-projector shows can be delivered with fewer machines, no downstream splitters and practically no signal latency. A d3 4x4pro with Quad-SDI VFC cards will be featured in the Panasonic stand (1-H20).

d3 will also be part of FACE's stands at 7-V210/7-W218. FACE is the d3 Technologies reseller for the Benelux region (Belgium, Netherlands, Luxembourg).

About d3

d3 is the world's first fully integrated visual production system for video professionals, combining a real-time 3D stage visualiser, timeline, video playback engine and projection mapping tools into one product. d3's unique integrated workflow assist the designer at all stages of the project, from pitch through development to final delivery. For more information: www.d3technologies.com

Related

Image placeholder title

Marvel Show Lights Up with d3 Technologies Servers

d3 Technologies media servers control a sizable array of projectors and LED for the immersive projection mapping, allowing characters to seamlessly travel between The Avengers’ tower and Loki’s fortress; they showcase Tony Stark’s lab, a landslide in the Himalayas and the top of the Statue of Liberty.

Technology Trends in Play at ISE

ISE Amsterdam a Huge Success; Big Trends Are In Play The organizers and exhibitors of the Integrated Systems Europe held their breath to see if the biggest AV trade show outside of North America would be relevant in the middle of an international economic crisis. Exhale. It was a record-breaking show in terms of siz

Image placeholder title

Matrox Graphics and Video at ISE 2016

Matrox Graphics and Matrox Video will share stand 11-F68 at ISE 2016 in Amsterdam RAI from February 9 to 11. Matrox Graphics will feature Mura IPX Series 4K capture and IP encoder/decoder cards, C-Series multi-display graphics cards, Matrox Maevex AV-over-IP encoders/decoders and Matrox Mura MPX video wall controller cards