Intelix DIGI-HD-XR

With Intelix’s DIGI - HD-XR, users can extend HDMI and IR over twisted pair cabling. Serving as an inline receiver and repeater, the compact extender works at distances up to 300 feet and can be cascaded up to four times. Compatible with Intelix’s DIGI -HD-UHR2 and DIGI -HD-IR2 systems, as well as its IR3 series components, the DIGI - HD-XR can additionally be used at DA outputs to increase the number of displays working in any given zone. Up to five DIGI -HD-XR units can be connected per run.

Apantac Crescent MicroQ

The Crescent MicroQ is a compact, fixed quad-split multiviewer with full-screen capability that can be easily mounted onto the rear of a high-resolution display. It also accepts and auto-detects composite, SD, HD, and 3G-SDI signals, and supports DVI, HDMI, and SDI outputs. This little unit displays embedded audio meters and support the TSL protocol over IP. Its power consumption is very low, at 12 W, and it is completely silent with a fanless design.

Lencore Smart Switch

Lencore’s Smart Switch detects and reports, via email, any wire failure or data interruption when paging for mass notification. Should the paging/data transmission fail, the switch automatically reroutes the data and voice, so the system’s performance continuity is not affected. The reporting capabilities let the user know when and where a break has occurred for ease of troubleshooting. The Smart Switch is included in every Spectra i.Net MNE C system package.

Altinex TP115-120/TP115-121

Altinex’s TP115-120 and TP115-121 compact video twisted pair (TP) transmitter and receiver distributes computer and HDTV video signals over extended distances to reach a projector or other display. The Altinex TP115- 120 provides transmission of computer and HDTV video signals over twisted pair-type (Cat-5/6) cable while the TP115-121 receives these signals over twisted pair-type (Cat-5/6) cable. The units offer video equalization that facilitates extended cable runs, and a signaldetect feature shows when a signal is present.

Covid Plenum 100 Foot HDMI Cables

Covid’s 100-foot Plenum HDMI cable with a built-in repeater makes it possible to send HDMI signals over 100 feet without the need for any external extender product. The built-in circuitry is located inside the display end of the cable and is powered by the source device. These cables are 24 AWG , support 1080p resolution, and were designed with a reinforced head to prevent breakage due to strain.

Icron USB Ranger2211

Icron Technologies’ US B Ranger 2211 is for extending US B 2.0 devices including keyboards, mice, interactive whiteboards, flash drives, hard drives, audio devices, and web cameras up to 100 meters over a single Cat-5 cable. The US B Ranger 2211 enables an installer to eliminate the need to carry multiple extenders in their inventory since power can be supplied to either the local extender or remote extender.

Draper Mobile Toolkit

Draper’s mobile toolkit includes searchable document libraries for Draper projection screens, projector lifts, and window shades for quick reference on the go. Also available for smartphones are assembly map tools for Drapers StageScreen and FocalPoint projection screens. The assembly map tools allow users to figure out which pieces go where to build any size of Draper’s modular screens.

Hall Research HR-733

Hall Research’s Model HR-733 extends uncompressed HDMI or VGA video with audio and bi-directional RS-232 to over 3,000 feet (one km) using one multi-mode fiber optic cable. The HR-733 provides three AV inputs: two HDMI (or DVI) and one VGA (or YPbPr), with corresponding audio via 3.5 mm L/R stereo or S/PDIF digital. The VGA video input is converted to HDMI and automatically scaled to the native resolution of the remote display. The receiver connects to the display using an HDMI cable. The unit is fully HDCP compliant and supports EDID pass-through from the remote display to the selected source.

Roland M-480 V-Mixer

Roland Systems Group (RSG ) has released a new firmware update (V1.5) for the M-480 V-Mixer console. The increased DCA groups to 24, provides new power increasing mixing effectiveness in larger and more complex applications, such as theater/broadcast and when using cascaded 96-channel configurations. Scene fade function allows channel fader levels to be set to fade smoothly when a scene is changed.

Planar LookThru Display Box

Planar Systems’ 32-inch LookThru Display Box is an enclosed showcase fronted by a clear glass surface that can display multimedia content in front of products placed inside the unit. Each Planar LookThru Display Box is a fully equipped display solution, with a Planar transparent active matrix LCD, which fronts the metal enclosure. Planar’s ERO (extended ruggedness and optics) technology provides a rugged, touch-compatible surface in front of the LCD.

Lectrosonics SPNDNT

Lectrosonics’ Aspen Dante network processor expands the Aspen digital matrix processor family. The processor is a full-featured DSP processor that can address both the Aspen and Dante matrices and add mixing, gain, and delay functions to the digital audio signals. Any of the 48 final mixes in the Aspen matrix can be assigned to any one or more of the Dante channels for transport to other endpoints in the network.

SurgeX Axess

Axess by SurgeX is an IP addressable, surge eliminating and power conditioning management system that allows integrators to monitor and control power distribution platforms via the internet. This system can customize, synthesize, and monitor individual outlets and power settings on integrated IP-enabled devices via remote access. Custom sequences can be created across the entire network with e-mail notifications sent about various power phenomena, based on user-defined conditions. Beyond power monitoring, Axess Elite offers two-way communication that monitors and manages system energy usage. Axess Elite collects temperature, voltage measurements and current draw measurements and reports back via an energy and power usage display.

Contemporary Research 232-Amp+

Contemporary Research’s 232-Amp+ stereo mixer/amplifier has now earned UL 2043 plenum rating, opening up new installation options. The 232-Amp+ is a compact, programmable mixer/amplifier aimed at integration with flat-panel displays and video projectors. This amp features a stereo line-level display/projector audio input and two mono aux inputs, and outputs stereo sound at 32 Watts RMS at eight ohms, or 40W at four ohms. The unit features RS-232 system control, a stereo, and two audio inputs that can mix and duck automatically.

PESA PRO-3GSDI-1616

PES A’s PRO-3GS DI-1616 routing switchers supports all common SMPTE and ITU standard serial digital video signals, as well as embedded audio and other ancillary data required for HD-SDI and DVB/ASI sources. Both models feature an internal power supply and can have multiple remote control panels added via an ethernet interface. The PRO-3GSDI-1616 supports standard data rates from 50 mbps to three gbps and video transports up to 1080p/60. The PRO-3GS DI- 1616s compact 1 RU frame design features front load, hot swappable card sets, and includes space for an optional redundant power supply and controller module.

Barco RLM-W12

Barco’s RLM-W12 DLP projector offers WUXG A resolution (1,920x1,200) combined with low operating cost and power consumption. Features include standard 3D capabilities, low noise level and 11,500 lumens light output. Due to its noise-reducing and powersaving design, the RLM consumes 33-percent less power than comparable projectors. They are also compatible with a range of traditional control devices, as well as with the Barco Projector Toolset software.

L-Acoustics 5XT

The newest and smallest member of L-ACOUS - TICS’ XT coaxial series, the 5XT is based on a two-way passive design with a nominal impedance of 16 ohms. The compact system contains a one-inch diaphragm compression driver coaxially loaded by a five-inch low-mid frequency transducer mounted in a bass-reflex tuned enclosure. The 5XT cabinet is made of premium-grade Baltic birch plywood to ensure maximum acoustical and mechanical integrity. A 3/8-inch microphone stand insert and two M8 inserts for the ETR5 flying bracket are integrated into the cabinet. The 5XT enclosure operates over a frequency range of 90 Hz to 20 kHz.

Elite Yard Master

The Yard Master consists of a black metal frame with T-legs that support either of Elite’s DynaWhite front projection or Wraith Veil rear-projection screen materials. Both fabrics have all weather nylonstitched reinforcements. DynaWhite is a 1.1 gain fabric with black masking borders to enhance perceived contrast levels. Wraith Veil is a 2.2 gain rear-projection material. The Yard Master includes a kit with all the accessories needed to put up a big screen that will remain secure even on a windy day.

7th Sense Delta Nano

7thSense Design’s Delta Nano media server delivers fully uncompressed 4:4:4 video playback at an accessible price point. Based on the core technology that drives 7thSense’s existing Delta range, Delta Nano comes in either a 1U rack-mount or small formfactor box chassis, and can store between five and 20 minutes of 4:4:4 video data. The unit has a single DVI/ HDMI output and supports all standard frame-rates up to 30fps.

Extron DMP 128

The DMP 128 is a 12x8 audio mixer featuring Extron ProDSP, automixing, and I/O expansion capabilities, and is available with acoustic echo cancellation. The DMP 128 offers a configuration approach to DSP that simplifies mixing, routing, conferencing, and room optimization. The DSP Configurator software allows the DMP 128 to be installed quickly, with easy-tolearn adjustments that can be heard in real-time. A digital audio expansion port allows two DMP 128 units to be linked together to expand input and output signal management and routing capabilities.

IBASE SI-58

IBASE Technology’s SI-58 is a slim yet powerful system designed for multi-display digital signage applications. The SI-58 player is only 1.2 inches thick, providing the ideal packaging for deployment with space constraints. SI-58 can drive up to six HDMI video outputs in HD 1080p resolutions. SI-58 incorporates a segregated flow ventilation system that prevents the accumulation of contaminants on the electronics.

Peavey IPR 1600, 3000

Peavey’s IPR 1600 DSP and IPR 3000 DSP power amplifiers combine user-friendly loudspeaker management with the lightweight power and performance of the original Peavey IPR power amplifiers. The onboard digital signal processing system includes preset banks for popular loudspeaker types and configurations, as well as Waves MaxxBass psycho-acoustic processing. IPR DSP users can choose from a bank of popular Peavey and generic loudspeaker types, as well as standard 10-, 12-, and 15-inch loudspeakers.

Optoma TW/TX631-3D

Optoma’s TW631-3D and TX631-3D are 3,500 ANSI lumen projectors with Eco+, a suite of features that reduces power consumption by up to 23 percent, while increasing lamp life by up to 42 percent. Another energy saving improvement of the Eco+ suite is an update to the familiar AV Mute feature. Traditionally, when selected, AV Mute would simply blank/mute the projected image while the lamp continued to burn at full intensity. With the new Eco+ AV Mute, lamp intensity is reduced by up to 30 percent, thereby reducing power consumption by up to 70 percent.

Russound BSK-1

Russound’s BSK -1 Bluetooth source kit is a high performance wireless audio kit for enabling all portable Bluetooth-equipped devices to stream content to any multi-room audio system regardless of brand. The BSK -1 features a two-piece design, comprising a Bluetooth transceiver and separate audio interface receiver with built-in active balanced line drivers for signal clarity; this design enables the units to be placed up to 300 feet apart. The unit also features an in-room bluetooth wireless range of up to 100 feet in line-of-sight applications. The BSK -1 audio interface uses a single Cat-5 cable connection to the Bluetooth audio interface receiver for communication and power.

Siemon Modular Furniture Adapters

Siemon’s Universal Modular Furniture Adapter was designed as a single product solution for securely mounting work area network connectivity in any of todays commonly used modular furniture systems. Siemon’s universal adapter adjusts to fit any known mounting requirement. This capability allows contractors and end-users to cost effectively procure a single mounting solution to supports a range of work area connectivity needs. This snap-in mounting feature uses robust latching elements to ensure secure faceplate and outlet retention while providing quick and easy installation.

ViewCast Niagara SCX

ViewCast has unveiled the latest version of its Niagara SCX comprehensive management software with IP ingest and MPEG -2 TS protocol, and new additions to the Niagara 9100 streaming system series: the Niagara 9100-4A, Niagara 9100-4AV and Niagara 9100- IP. These products are aimed at lowering costs and increasing video delivery capabilities for content delivery networks and service providers. The most recent version of Niagara SCX is preloaded on every Niagara system and enhances flexibility and improves the live streaming delivery experience.

Symetrix Symnet Composer

Symetrix’s SymNet Composer DSP configuration software automatically identifies the type of audio I/O module installed in each of the Edge frames’ four I/O card slots (up to 16 channels of local audio). When connecting multiple Edge frames via Dante gigabit network audio (up to 128 channels total), network management is accomplished entirely within the SymNet Composer programming environment. A fully open architecture application, Composer’s navigation accelerates the audio path design process. System designers exercise complete creative control selecting from a library of over 600 proven DSP processing, routing, mixing, and special purpose modules.

VMP ER-SS1U Rack

Video Mount Products’ ER-SS 1U rack mounted sliding shelf features a maximum extension of 13.8 inches. The shelf locks into place when fully closed to prevent drifting. With a one space rack height of 1.75-inches and a useable shelf area of 16.3 inches wide by 13.8 inches deep, the ER-SS 1U has a load capacity 35 pounds. It includes 10-32 and 12-24 mounting screws and has a black static resistant powder coat finish.

Platinum Tools VDV MapMaster 2.0

Platinum Tools’ VDV MapMaster 2.0 tests Cat-6, Cat5e, Cat-5, Cat- 4, Cat-3, and coax cables, as well as shielded cables. Video and data cables can be connected to their respective remotes at the same time to improve testing efficiency. Patch cables may be tested without removing the master remote from storage. Length mode is used to measure the length of entire cables and its pin pairs and allows for viewing and adjusting the length constant value for video, data, and voice cables.

RDL RU-ADA8D

The RU-ADA8D is designed in the durable, all-metal, 1/3 rack width MAX RACK-UP enclosure. The compact design allows for very highdensity audio distribution. Three RUADA8D units may be mounted in available RDL rack adapters to provide up to 48 channels of audio distribution in a single RU. The RU-ADA8D features separate input and output trimmers and dual-LED VU metering with headroom, low distortion, crosstalk isolation, wide flat frequency response, low noise performance, and common-mode signal rejection.

Philips Touch Series

The Philips Touch Series consists of 10 different products available in 32-, 42-, 46-, 55-, and 65-inch sizes. An optical sensing dual camera system allows for two simultaneous touch points at the same time. Infrared sensing multi-touch technology allows for multiple simultaneous touch points at the same time. Both technologies are embedded in the display, requiring no upgrades or component changes. For larger digital signage implementations, users have the ability to scale their touch needs through multiple video wall touch systems.

Line6 L3m

StageSource L3m uses L6 Link digital networking and six innovative “smart speaker” modes to optimize its output for a variety of performance scenarios. Smart Speaker modes can be set manually or automatically via built-in orientation sensors that detect whether the speaker has been pole-mounted or rotated and tilted for use as a monitor. A compact, full-range, three-way speaker system, the StageSource L3m’s tri-amped design delivers 1,400 watts of audio through dual 10-inch woofers and a horn-loaded, one-inch exit compression driver; these combine to deliver 132 dB maximum SPL.

Phoenix Audio Q3 MT305

A high-quality conference speakerphone that can turn virtually any space into a professional- sounding conference room, Phoenix Audio Technologies’ Q3 MT305 can now fit into any facility’s existing IP-based infrastructure. Able to connect to any computer, and compatible with most SIP/ IP phone service providers, the MT305 has the ability to gain power through the ethernet cable. The MT305 unit comes equipped with a built-in keypad and LCD screen.