It’s the kind of extraordinary musical event that happens once in a
lifetime: quintessential singer/songwriter Paul Simon got together with
iconic jazzman, composer and music educator Wynton Marsalis for a very
special three nights of live performances at the Jazz at Lincoln Center
in New York City. The event featured Simon and Marsalis performing
all-new orchestrations of Simon’s songs with the Jazz at Lincoln Center
Orchestra and special guest Aaron Neville. HARMAN’s Studer® Vista 5 and
Soundcraft® Vi6 digital consoles were brought in to handle the
considerable mixing requirements for the concert.
“There
were more than 100 inputs for this show,” noted Michael Conner, Simon’s
front of house engineer and a veteran mixer with more than 25 years’
experience. “We had to mic not only Paul, Wynton and Neville but the
entire Jazz at Lincoln Center Orchestra and Simon’s touring band.”
Conner
had to combine two different approaches to mixing for these concerts.
“Paul is usually mixed more for an arena or theater-type show, while
Wynton’s is more of a ‘natural’ sound, combining the room, band and PA
as one sonic unit,” he noted. “The sound is less ‘poppy’ and more
‘orchestral’ maybe, compared to Paul. It made this concert more
challenging than most because we had to combine those two different
styles of mixing together and get something that worked.”
“On top
of it all, the whole thing was just gigantic. I had to deal with a huge
amount of inputs. Having to mic that many people was incredibly
daunting. I had overheads everywhere.”
Conner and his team came
up with the solution of using the Studer Vista 5 in conjunction with the
Soundcraft Vi6 as a sidecar. “I’d had about four years’ experience with
the Vista 5, having used it on tours with David Byrne and then with
Paul,” Conner added. “Wynton is normally mixed on a Vi6, so using the
two together just made sense, along with the fact that they’re both
HARMAN products and are easy to interface with each other.”
“One
of the best things about the Vista 5 is when you’re looking to access a
particular function,” Conner continued. “I came from an analog
background. This is not a confusing digital desk. The channel strip is
in front of you at all times. You can reach the gain pot; you can reach
the EQ; anything you need is always right in front of you. Touch a
button and there it is—everything is easy to get to, making it easy to
operate and smooth to mix on.”
Such nimbleness is especially
handy when mixing Simon. “Paul makes a lot of changes to the
arrangements on a daily basis,” Conner said. “In his opinion the song
was born when it was put on the album and then it grows up and evolves
through time. So we might come into a show and change a song completely,
change an arrangement or change a part. That would be tough if it were
difficult to move around the desk. Paul also expects that when he makes a
change, he’ll hear it quickly. The console allows me to do that because
the interface is so straightforward. Paul is an ‘analog guy’ and he’s
used to grabbing a knob and hearing something happen. Some of the other
consoles out there are great, but are a little cumbersome when it comes
to making adjustments or changes. That’s one of the reasons I prefer the
Studer.”
The concert was a resounding success, according to
Conner. “We were able to achieve a really good sonic blend between all
the musicians and performers while maintaining clarity and isolation of
the vocalists and instruments,” Conner pointed out. “By the time we were
into the concert, I knew we had nailed it.”
Conner started his
career in Los Angeles around 25 years ago, learning by working in the
area’s recording studios, starting his own sound company and moving to
his current position with Clair Global. “I’ve done tour sound, theater
sound, the whole nine yards. It’s been a 25-year journey and now I’m
really happy with Clair—without them I wouldn’t be sitting here right
now doing front of house for Paul.”
For more information:
www.harman.com